API-530API-579-1 Part 10Level 2 FFS

Structural integrity assessment for fired heater & boiler tubes, in hours — not days.

HeaterIntegrity runs standards-based Level 2 fitness-for-service and remaining-life calculations on fired heater and boiler tubes, so your team gets a defensible answer without weeks of spreadsheet work.

No credit card required for the trial · Cancel anytime
app.heaterintegrity.com
Assessment resultsRadiant section · Alloy 800H
54components assessed
27.3 yraverage remaining life
1below desired life
Remaining life — 10 most critical Meets desired lifeBelow desired life
Bar chart of remaining life for the 10 most critical components, with desired-life and next-inspection thresholds; one component falls below the desired life

Temperature excursion

Cumulative creep damage: 29.0 years of remaining life at original temperature versus 13.5 years with a modeled excursion Same component, modeled with a daily overtemperature cycle.
API-530 / API-579-1 Part 10Fired Heaters & Boilers, Fitness-for-Service
Design-Based VerificationMinimum Elastic/Rupture Thickness
FFS Level 2 AssessmentRemaining Life & Retirement Thickness Calculations

Built for the engineers who make the integrity call.

Every fired heater or boiler turnaround raises the same question: is this tube fit for another run? Whether you are an in-house integrity engineer or a fitness-for-service consultant delivering for clients, building that answer in spreadsheets is slow and hard to check. HeaterIntegrity runs the standards-based calculations in one place, so your time goes into engineering judgement — and every client or turnaround gets the same standard of report.

API-530 / API-579-1 Part 10, Level 2 methodology — fired heaters & boilers
Both plastic-collapse and creep-range failure modes checked
Built-in material property & allowable stress look-up tables
Consistent, traceable results for your own team or your clients
Product

Everything the assessment needs, nothing it doesn't.

Level 2 FFS Engine

Remaining-life and retirement-thickness calculations for fired heater and boiler tubes, per API-530 / API-579-1 Part 10.

Damage = 1.0 Service life →

Creep & Plastic Collapse

Checks both time-dependent creep damage and plastic-collapse (thickness) failure modes in one assessment.

Plastic collapse Creep damage limit

Word, Excel & Saved Projects

Every assessment exports to an editable Word report and an Excel workbook, and saves as a project file you can reopen and update at the next inspection.

.docx .xlsx .hiproj

Refining Results

Component-level sensitivity analysis, outlier detection, and creep-basis comparisons to stress-test your inputs.

Original temperature → two alternate scenarios

Team Seats

Add up to 4 engineers on one subscription, with individual sign-in for every user.

Cloud-Based, No Install

Runs entirely in the browser. Nothing to install, license, or maintain on your side.

Self-Service Billing

Manage payment methods, invoices, and plan changes yourself, anytime.

Built by Engineers

Developed around the methodology practicing integrity engineers actually use — not a generic calculator.

How it works

From inputs to a defensible answer in one session.

01

Input data

Inspection data, and design & operating conditions for one or more heater sections — measured wall thickness, dimensions, pressure, temperature, and material, in SI or Imperial units.

02

Run the assessment

HeaterIntegrity calculates remaining life, retirement thickness, and minimum required thickness per API-530 / API-579-1 Part 10.

03

Refine your results

Explore sensitivity, outliers, and creep-basis comparisons before you commit.

04

Document & export

Take the results into your inspection file, turnaround package, or RBI review.

Sample Output

See what a real assessment actually produces.

Every image below comes straight out of HeaterIntegrity's own calculation engine and report generator, run against a representative fired-heater example — not a mockup.

Assessment dashboard showing plastic collapse, creep damage, remaining life, and retirement thickness for every component

Failure Modes Assessed

Plastic collapse, creep damage, remaining life, and retirement thickness — every failure mode, checked for every component, automatically.

Cover page and methodology appendix of an automatically generated Word fitness-for-service report, on the assessment firm's own letterhead
Word report

Full Engineering Report

A complete, editable Word report — cover, methodology, per-component tables, and a full assessment-methodology appendix — generated in one click, under your firm's own name and logo.

54components assessed, this section
27.3 yraverage remaining life, creep-governed
1component flagged below desired life, out of 54
Cumulative creep damage chart comparing a component's original temperature against a modeled temperature excursion event, showing remaining life dropping from 29 to 13.5 years
Refining Results — Temperature Excursion

Model a real excursion, not just a snapshot.

A documented flame-impingement or coking event doesn't just add a line to a report — it changes the number. Here, a component with 29 years of remaining life under normal operation drops to about 13.5 years once a short daily overtemperature cycle is modeled, run in seconds instead of a second full assessment.

Validation

Checked against the standard's own worked examples.

HeaterIntegrity's design-based check and Level 2 creep-life calculations are checked against 4 published worked examples from API 579-2 / ASME PTB-14-2023, item by item, and closely reproduce the published results.

4worked examples checked, item by item
<1%average difference from the standard's own published results
See the full validation walkthrough, item by item
Pricing

Simple, per-seat pricing.

No setup fees. Cancel anytime. Start with a 2-day free trial — no credit card required.

Monthly
$399/ seat / month

Full Level 2 FFS engine
Refining Results included
Add seats individually, billed per seat (max 4)
Cancel anytime
Subscribe Monthly
Save 17%
Annual
$3,990/ seat / year

Full Level 2 FFS engine
Refining Results included
Add seats individually, billed per seat (max 4)
2 months free vs. monthly
Subscribe Annually

2–4 seats: every seat is $339/mo or $3,390/yr  ·  Need 5+ seats? Contact support@heaterintegrity.com for a team plan.

Assessment services

Prefer to have it done for you?

No in-house integrity engineer, or no time before the turnaround? Our engineering team can run the assessment for you and deliver the complete engineering report — built on the same HeaterIntegrity engine, so results are fast and consistent.

Design-based check & Level 2

Remaining life, creep damage and plastic collapse for your fired heater or boiler tubes, delivered as a full engineering report with the supporting workbook.


Radiant, convection and other sections
Your inspection data, our engineers
Quoted per assessment
Level 3 assessments

When Level 2 isn't enough, we scope and deliver advanced assessments, including detailed numerical analysis, for the components that need it.


Scoped case by case
Builds on the Level 2 results
Quoted per project
Request a quote

Tell us the heater, tube material, operating conditions and the inspection data you have — we'll reply with scope and price.

Try it before you subscribe.

Every new account gets a 2-day free trial of the full Level 2 assessment engine — no credit card required.

Start Free Trial